DV LED Video Display
• 16:9 aspect ratio
Axion II ChipFlip Features
-
“ChipFlip” is a revolutionary new technology of encapsulating fine pixel pitch SMD 1010 LED lamps to PCB boards.
-
Traditionally the circuit design for SMD displays for both the Positive pole, the Anode, and the Negative pole, the Cathode, face upwards.
However, the circuit design for “ChipFlip” for both the Positive and Negative electrodes face downward and the corresponding encapsulation is called the “ChipFlip” Process. -
The strength of the solder used in the “ChipFlip” Process” is 100 times stronger that that normally used in the SMD process.
-
ChipFlip has a failure rate of 5/PPM compared to the failure rate of other SMD at 50-100/PPM.
-
The “ChipFlip Process” also employs Common Cathode technology whereby the electric current passes through the Cathode, the negative pole or the ground.
-
Power is not on continuously but only draws power as needed. As a result, heat generation is greatly reduced.
-
Brightness levels can reach 4000 nits. Typically only outdoor displays can reach those levels.
Axion Technical Specifications
LED
LED Type SMD1010
LED Configuration 3 in one
Pixel Density 1,638,400/m²
Module Size 11.81” x 6.64”
Module Resolution 384 x 216
Modules Per Cabinet 4
Lifetime to Half Brightness (L50) 100,000
Contrast Ratio 10,000:1
CABINET
Aspect Ratio 16:9
Cabinet Material Die Cast Aluminum
Cabinet Size 23.62” x 13.28” x 2.28”
Cabinet Resolution 768 x 432
Cabinet Weight 17 lbs.
Service Access Front
IP Rating IP30
INTERNAL OPERATION
Driving Method 1/32th Scanning
Gray Scale 14-18 bit
IC Driver MBI5153
Refresh Rate >3840Hz
Frame Frequency 60Hz
AC POWER
Source Voltage 100-240V, 50/60Hz
Max Power Consumption 165W
Avg. Power Consumption 85W
ENVIRONMENTAL
Operating Temperature -10°C to +50°C
Storage Temperature -20°C to +60°C
Operating Humidity 20% to 90% RH
INTERNAL CONNECTIONS
Axion has no external connections
100% internal connections inside cabinet
Data in / out RJ45
AC Power in / out IEC